Economy runs EDM machine tool

  • Time:
  • Click:100
  • source:BAGANZ CNC Machining
A lot of workshops handle cost in what consider a machine tool carefully. How many the sources of energy does it waste? It can deny the quantity of heat with overmuch generation, make the burden of air conditioning system of the workshop heavier? Can it prolong the life of cutting tool and running stores? Mitsubishi EDM added a lot of character and function on the line cut in it and machine tool of treatment of ram type electric spark. Because the sources of energy and raw material price rise, what must consider the economy of machine tool of avery kind of and managing cost carefully is politic. Introduce according to this company, in them newest in offerred machine tool, a few drop the case of cost, managing the sources of energy. Machine of EA12V quarter model is the machine tool of a kind of medium norms, treatment work measure is 820 × 550 × 250mm. 1.

The FP80V power source of machine of EA12V quarter model has return of electric power second birth, it compares the FP60EA power source that it replaces, reduce electric power to use up 20% . The sources of energy of this second birth " managing the excess energy of a scintilla, until store enough energy, in order to produce another scintilla. " 2.

When machining hard alloy, FP80V compares the power source of old model, managing the sources of energy is used up 50% , what it has to be used at machining hard alloy is optional SP circuit. This special circuit that new power supply does not need to machine hard alloy. 3.

This is new although power source is adjusted when moving below high-energy quantity, also produce less quantity of heat. This reduced the cooling cost of the workshop, reduced an effect all round the danger of equipment environment temperature. 4.

The interpose report level that can adjust the medium in workpiece chamfer with NC program, use up in order to reduce the sources of energy of pump. Different picture enlarge expresses filiform electrode, when it reduces feed, because wear away, and a few becomes taper, how to affect the figure of workpiece. Right graph makes clear how to slant buy this taper is machined with maintaining high accuracy. 5.

Filter the system uses fine net, macrobian life to filter package, make the watch area of section volume grain increases one times, life is lengthened previously 4 times of model. 6.

Because improve,filter, clean interpose report liquid reduced 2 spark of finish machining, eliminated the specific power consumption that brings about. 7.

In series of machine of cut of electric spark line, FA-S series includes FA10S, size range of pipe bent is 350 × 250 × 220mm and FA20S, size range of pipe bent is 1050 × 800 × 295mm. 8.

AE power source has circuit of electric power second birth. 9.

The colophony that this kind of power source uses up is before the power source of model uses up resinous 1/3. 10.

Contain the pump drive of inverter, in change in finish machining process from rough machining, should rinse a quantity to drop, when bear is reduced, reduce the rotate speed of electromotor. 11.

Below all night or the circumstance that run on the weekend, when final order ends, can put out all pump with means of a M. 12.

CS(managing cost) means is when feed of from the top down of metallic silk thread, reduce its feed, drop tinsel line use up. Because wire wire journey is slower, wear away accumulative result, when its approach when the bottom of cutting, a very small taper arises on silk thread. Tinsel line is finer and finer in be down the journey. To compensate this taper, CS means offers slight and accurate, perpendicular at silk thread slant buy, tilt it towards taper consequently, in order to achieve tall cutting precision. 13.

With CS means, changing when machining a spare parts, filter system and high-pressured pump are shut automatically. Machine a machine tool to line cut and ram type electric spark, added a lot of managing character, be helpful for raising productivity and economic benefits. CNC Milling