The principle of electric equipment structure of radial drilling machine

  • Time:
  • Click:161
  • source:BAGANZ CNC Machining
Dispatch of net of machine tool of Chinese numerical control: (1) when machining whorl, requirement main shaft is inverting. For example Z3040 rocker is gotten use 4 electromotor to procrastinate move, they are main shaft electromotor respectively, rocker rises fall electromotor, hydraulic pump electromotor and cooling pump motor, these electromotor use the direct means that start. (2) cooling pump motor drives cooling pump to offer cooling fluid, ask only one-way rotate. (3) rocker rises fall electromotor requirement is rotating reversely. (4) the shift of rocker loosens according to rocker the program of clamp of rocker of → mobile → undertakes strictly. Accordingly main shaft electromotor needs only one-way rotate. (5) of radial drilling machine advocate motion and the motion that feed moves to all give priority to an axis, for these two motion electromotor of a main shaft procrastinates move, part main transfer machinery of classics main shaft, feed main transfer machinery realizes the whirl of main shaft and feed. (6) the clamp of main shaft of inside and outside and loosen, the clamp of main shaft and rocker and loosen usable machinery operation, electric, machine, electric, hydraulic pressure or electric, hydraulic pressure, the control method such as machinery comes true. (7) have indication circuit of chain and protective link and safe illume, signal. If use hydraulic pressure device, criterion electric machinery of stock hydraulic pump, procrastinate move hydraulic pump to offer pressure oil to come true, hydraulic pump electric machinery asks to be able to rotating reversely, use control according to asking to use a site. Because the clamp of this rocker and rocker rise,fall to undertake by automata. (8) ask to get used to the treatment of a variety of forms, the whirl of main shaft of old radial drilling machine and feed motion have bigger timing range, come true by mechanical gearshift orgnaization more usually. Orgnaization of main shaft gearshift and feed gearshift orgnaization all are installed inside main shaft box. Main shaft positive and negative turns to use mechanical method to come true commonly. (9) component of motion of radial drilling machine is more, to simplify gearing, use much stage electromotor to procrastinate move. CNC Milling